Door Handle Replacement
Door handles may seem like an insignificant thing, but if you dislike the style or design of them, or are unable to use them and use, you should consider replacing them. With some patience, you can install the new handle in no time.
The majority of modern door handles come with cover plates that conceal the screws for an attractive appearance. However, you will need to attach them separately if your new handle doesn't have them attached already.
Removal of the Old Handle
Door handles are not only essential for aesthetics of your home but they're also vital for safety since they allow you to lock and unlock your door. As time passes the door handle can begin to lose its grip or feel loose. It might also begin to look worn out and old. This is a sign that it's time to replace your door handle.
One of the first signs that your door handle requires replacing is the fact that it is becoming difficult to operate. This is a serious problem since you won't be able to lock or unlock the door, which could put you and your family at risk.
It is also recommended to replace the handle on your door in the event that it's damaged or broken. A damaged or broken door handle can be risky, particularly for elderly or children members who struggle to open it. They could be trapped. It's simple to replace a damaged handle on the door.
Modern door handles are generally standard sizes and should be able to fit any door. If you're not certain that your new door handle will work, take out the old one and measure the holes in its housing. This will allow you to buy the right door handle.
It is the easiest way to take off the old door handle by unscrewing it from the door. Usually, a screwdriver is used. However, some door handles have the cover plate which hides the screws that mount them, so you'll need to pry off this cover plate to get access to the screws underneath. After you have removed the old handle, make a note of the way the spindle is connected. This will help you align the new handle.
You can also remove the door handle by removing the latch mechanism. You can use a screwdriver to remove the door handle. However, you will have to locate the small latch which is located on the edge of the trim piece. After removing the latch, unscrew the handle and strike plate. Then remove the latch from the door's edge.
Take off the Strike Plate
When you replace the handle, you'll be required to replace the latch plate, which holds the hole that the door's latch is inserted into when it closes. The package the new handles are packaged in will have two options for latch plates - either a rectangular or a circular one (see the diagram above for door handle parts). If your current latch plate is rectangular, swap it to a round one so that the latch hooks onto the strike plate in a way that makes the handle easier to use.
The first step is to remove the screw holding the old latch plate. The screws can be very tight, and may require some force to loosen. It is helpful to have a second person assist with this part if possible.
The latch plate should come out of the door once the screws have been removed. If it is stuck or doesn't move using a nail file to scratch around the edges of the latch plate. This may help free the plate.
Now you can prepare the new strike plate for installation. Utilizing the wood screws that were included with your new handles, attach the latch plate onto the inside of the doorjamb. Be careful not to tighten too much the screws, as this could damage the strike plate.
If you're unsure whether the latch plate is in the proper position, shut and then open the door to see whether it locks and closes correctly. If not, you'll need to adjust the strike plate either up or down, or move it forward or back, until the door closes and latches properly.
If the door is still moving or jiggles, then you may have to expand your latch hole on the strike plate. This is more prevalent in older doors, however it could also be caused by wear and tear, hinge mortises that are too narrow or not the right size for the latch, or from damage or a broken strike plate that is damaged or broken. If this is the situation, follow the same procedure as adjusting the strike plate, using a metal file instead of an hammer and chisel.
Take off the Latch
The latch is a bent metal piece that slides into and out of a hole in the inside of your door. When you turn the handle, it pushes this latch forward and allows you to open the door. It also connects to an opening in the door frame to keep the door closed. If your door is wobbling when you close it, an upgrade to the latch could be all that is needed to correct the issue.
The screws that hold the door latch are hard to spot however, you can insert a screwdriver into a small hole on the trim plate and then pry the latch off. After you've removed your trim plate, it'll be simple to take off the latch and the remaining bolts that hold the spindle and latch in place.
If the latch isn't able to release you can try using a paper clip or a tool to release it from the handle mechanism. Insert the item into the recessed latch slot, and gently twist it or jiggle until you feel the that the latch and handle are beginning to separate. You may need to repeat this process several times before you can take the latch off.
It should be possible to slide the new latch into its slot with no issues after you've removed the old one. Use your new screws to connect the latch to the strike plate or door frame. Make sure it's correctly placed in the slot, aligned with the screw chambers.
Before you install the new handle, make sure to measure your current backset (the distance from the center of the big hole on the front of the door to the edge). Also, make sure whether the size of the latch on the new handle is a good match to the measurement of your existing handle.
You'll require a new cylinder for your lock if replacing the handle and latch or your existing one is damaged. If you are not changing locks the new lock will fit inside the recess you have already installed, and work with your existing keys. Be sure to select an entry point with rectangular cover plates that match your handles.
Take off the cover plate
You can replace your door handles with a contemporary design of roses and levers to enhance the appearance of your home. You can purchase complete sets that include escutcheons, privacy adaptors and escutcheons.
To replace an internal door handle take off the cover plate (or rose) that covers the screws and mechanism. Use a flathead to remove the plate. It could have an opening along one side or be held in place by a pin.
Remove the screw that is holding the handle inside and set it aside once the cover plate has been removed. You'll also want to remove the screws that are holding the latch and plates to the door, which you can accomplish by loosening them using a Philips screwdriver. Remove the inner plates and latch from the door. Set them aside.
Some doors don't have this gap. If yours isn't allow for a handle, you'll have to make a hole through the door. The process for doing this is the same procedure opening a door using locks, but you'll need to take extra care not to harm the door or frame.
door handles repairmywindowsanddoors of new door knob screws is necessary after the holes have been drilled. Be sure to purchase the same size as the previous ones, to ensure that you do not end up with the handle that is too tight or too loose. You'll also have to install a new latch plate and strike rod, which aren't included with the majority of door handle sets.
If you're looking for a high-quality replacement for your interior door handle set Try the Amazon's Choice FAERSI two-piece chrome finish handle set. It's a factory fit and has received a plethora of 5-star reviews from happy customers. It's an excellent option for replacing worn out or damaged door hardware on your Chevy.